The T.A.R.D.I.S. phone stand, support your phone with Time and Relative Dimension in Space, and make your calls from the comfort of a police public call box.

My profile is fully painted and ready to print with an AMS, with only 4 colours required:

• Blue
• White
• Black
• Silver/Grey

Print settings

I'd highly recommend you use my profile for printing as it's fully painted and tested, and I've spent time optimizing things like print speeds, infill, support etc, to ensure decent performance (especially around the door handles which are particularly small and thin). However, if you did want to slice it yourself, here's a few pointers:

• Layer Height: I've designed this to be printable at 0.2mm or smaller. My profile and the photos I included are all of a print at 0.2mm layer hight in the interest of keeping print time down. However, a smaller layer height will give you increased detail in the signs, door handles, and keyhole.
• Support: Support is best used underneath the bottom extrusions around the base of the top where it sticks out. Paint on supports using the fill tool for this area and set it to Tree/Organic supports only on build plate. It may (if you have auto on) suggest supporting the door handles but I'd advise agains this. Using my profile they print great, and if you use supports on them, it can fuse to them.
• Speed: Try to ensure your outer walls are not exceeding 50mm/s, and ensure that the door handles are covered by the small perimeter threshold worth a 40-50% speed.

My TARDIS collection currently includes:

• Tardis Light box
  • AMS Multi-Material Version
  • No-AMS Print Colours Separately Version
• Tardis Storage Box
• Tardis Phone Stand