Calgary Flames Hueforge
If you resize the model from 200 x 200 make sure you do NOT scale the Z axis or the print will not work.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Black Transmission Distance: 10
PLA Overture Red Transmission Distance: 5
PLA Overture Yellow Transmission Distance: 5
PLA Overture White Transmission Distance: 3
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #15 (1.28mm) swap to Yellow
At layer #23 (1.92mm) swap to White for the rest.