Iconic FAB's Stealth Press is fab (forgive the pun!) but the generic soldering iron mount only grabs the soldering iron by the metal collet which heats up. It's also REALLY tight to get a cable through. So I made this one to fit a ‘standard’ 900M soldering iron. I have about 5 and this fits all of them, so hopefully it's good for you too.
It features a larger hole AND wider mouth in case your power cable isn't removable so you can insert the wire first then back up the soldering iron into the mount before screwing in. You'll have to head over to the original Stealth Press page for the rest of the parts, as Iconic FAB definitely deserves your downloads!
My main recommendation if you aren't sure if yours will fit is to get the above linked soldering iron and keep it permanently on the press, because it PLUS a set of these heatset insert tips is cheaper than just the tips alone for a Pinecil/TS101 (which it performs just as well as), and this way you don't have to keep dismantling your setup over and over.