Splash and impact-proof outdoor lamp case for the LED Lamp Kit 001.

This rugged lamp case features several TPU seals, protecting the lamp from rain and splash water, as well as a protective TPU ring on the outside, making the case more impact-resistant.

The backside has a hook and magnets (5x6mm) implemented, making it easy to always find the right position for the lamp on your camping trips.

The lamp can be powered by any powerbank or USB outlet.

How to build:

The build is pretty straightforward and should be accomplishable very fast.

The bottom part has a print-in-place hook that needs to be loosened up. I used a small bit for this, and it worked really well for me.

Now, add the TPU seals to the case and the cable of the lamp.

The outer TPU seal needs to be pressed onto the case, it's a bit finicky, but I believe in you.

Place the lamp in the case, the cable needs to be pulled a bit to make it fit right.

Now, just place the diffuser in the case and screw it together tightly. There you have it, your Camping Light is ready for your next adventure!

If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you “buy me a coffee”.