Batman, Joker, and some happy gargoyles

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Prusament Galaxy Silver Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Charcoal Black
At layer #5 (0.48mm) swap to Blue Gray
At layer #9 (0.8mm) swap to Galaxy Silver
At layer #18 (1.52mm) swap to White for the rest.