P/X Series Hotend - Easy Bolt Removal and Holding Tool
Copyright Claim
P/X Series Hotend - Easy Bolt Removal and Holding Tool
Boost
32
82
18
GIF
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
19 min
1 plate
0.2mm layer, 2 walls, 15% infill
30 min
1 plate
Boost
32
82
18
0
105
79
Released
Description
This is probably the best, safest and easiest way to remove the loosened bolts from your P1 or X Series Printer!
Press the removal-tool on both bolts from the top and remove them.
They get stuck within the print and are in a safe position and wont fall off!
When inserting the bolts wiggle the tool a bit and it will come off easily.
I found myself loosing these bolts within the printer sometimes whenm removing, it was a nightmare getting them out…
This tool is by far my best friend for easy hotend changes!
Check out my other cool and helpful tools on my profile!
Comment & Rating (18)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
absolutely awesome and a must have tool for changing the nozzle. great model and great functionality!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice.. comfortable..
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
nice
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
small but usefull
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great print
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld