Model

Inspiration of Design taken from -Rotating Switch Game Card Case - https://www.shophagibis.com/products/rotating-switch-game-card-case

The design is modelled to be able to rotate freely on itself without the need for a bearing or any other hardware. This is the second iteration of this design, as modifiecations are made, I will make note of what I have changed from its predeccesors.

Print Settings

The Nintendo Switch logo in the middle of the Cartridge Carousel is designed to give you two options:

• If you have an AMS the logo can be easily painted in the slicer
• If you do not paint it in the slicer, the logo will not appear at all

Assembly Instructions

1. Put the pieces together
2. Done… Thats it…

Modifications from Previous Version:

1. Slimmer Base piece to shorten Print time and to save on unneccesary material
2. Taller Ramp piece to make the game cartridges raise up more
3. Inclusion of a Variable layer height Lower Casing 3mf file to make the ramp smoother for the games to raise
4. A more printer friendly fillet (radius) on the Upper Casing piece
5. Better Tolerance tested Game Slots to ensure the games dont have too tight of a fit