MMS Material Rewind 材料可回卷(humidity protection, 4L Airtight box as the cover)
MMS Material Rewind 材料可回卷(humidity protection, 4L Airtight box as the cover)
Print Profile(1)
Description
This is new revision of airtight dry box of MMS with material Rewind function.
See below video, the material can be rolled back by pulling the rack.
这是一个全新版本的具有材料回卷功能的“MMS手动材料管理系统”，使用标准的4L 密封盒。
如下视频，材料可以被通过拉动拉杆回卷入料盒。
And the design of “clutch” makes the filament send out smoothly. See below link video guide you assemble the single unit.
并且离合器的设计使其在打印中不影响出料顺滑。参考如下视频顺序安装组件，完成单个单元的组装。
addition components
除了打印件之外的其他零件。
1.φ4*4mm magnet------3PCS. place three magnets in below three holes. and make sure these two part attract each other by the magnet.
直径4mm*4mm高的强磁------3颗。 如下图方式安装3颗强磁。并且确保两个组件可以如图方式相互吸引。
2. 2.2mm*6mm self tapping screw-------1PC.
2.2mm*6mm 自贡螺钉---1颗。(可以使用接近的规格代替)
3. silicon rubber tube inner dia.14 outer dia. 18.
Put on the tube like below picture shown.
see below link, for your referance. I bought the tube from here.
硅胶软管，尺寸如下。内径14mm，外径18mm。
如图方式套入滚轴。
如下链接卖家供参考。为本人采购软管的淘宝店家。
硅胶管软管硅橡胶管无味家用水管饮水机家用耐高温弹性透明软管-tmall.com天猫
4.604 bearings-------4PCS
604 滚珠轴承-------4颗
The link of air tight box. and the size is about 220.7*95.5 with R22.7 Fillet. if you can not found this size of box in your conntry, tell what you found, i will check if i can modify it to fit to your size or not.
如下是4L密封盒的购买链接，开口处的尺寸是220.7*95.5，4个圆角是R22.7. 如果你找不到合适尺寸的密封盒，告诉我你能找到什么规格的，我来看看是否有机会修改一下设计。
https://item.taobao.com/item.htm?_u=c5bq5moaee6&id=639130539569&spm=a1z09.2.0.0.21572e8dN68Uq0
Comment & Rating (43)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
