This is simple version of Ultimate light sword. For people who does not want to have all the CAT light things in there. Just an simple Saber design. This is first one of my series of saber desing.
This Saber takes around 4h35m to print on X1C, takes around 105g of filaments.
Ultimate Light Sword
https://makerworld.com/en/models/162660#profileId-178560
I Highly suggest to use Glow in the dark filament or Translucent filament for the internal parts, and pick any color you like for the external shell.
For external parts, DO NOT USE SOME BRITTLE silk filaments, it will break very easily. Some silk filaments will have very poor layer adhesion due to high speed printing cause part failure.
You will need to remove brims on both internal and external parts. Brim was added on all the printing profile to ensure the printing success rate. Print without brim is not recommaned.
After you clean all the brims. follow these steps show on the gif.
This is a simple version of the ultimate light sword. I made a few design change on both internal and external to improve overall printing quality and have a slight different look.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.