Are you an adventurer with good knees? Have a hankering for sweetrolls, maybe? Well, you can't leave home without a handy dandy map to take with you on your travels, can you?
This map came out really nicely on the Bambu Lab P1P, using only 4 colours. Please note that I used a 0.2mm CHT nozzle for this to get the details dialled in. You can of course, use a 0.4mm nozzle but I fear you will lose some of the details in the lettering. The layer swaps will remain the same.
This is a LONG print - 12 hours on a Bambu Lab P1P, on a 0.2mm nozzle. Please make sure your bed adhesion is up to the task!
Unfortunately due to the high detail level of the map, Makerworld will not allow for one-click printing (slicing it takes too long in the cloud). However, I have provided both the 3MF and the STL as raw files for you to download and open up yourself.
The 3MF already has all settings provided (for a 0.2mm CHT nozzle) for Bambu Studio. it will take a while to slice due to the high details. If you do not want to use these settings, please download the STL file, and follow the print instructions below:
Print Instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. I highly recommend using a 0.2mm nozzle for this print.
Filaments Used:
Swap Instructions:
_______________________________________
If you'd like to support me, I now have a Patreon!
Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more!
If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!
_______________________________________