Guns and Coffee Lightbox by DREWZUKI

DREWZUKI

Art>Signs & Logos

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 8% infill

Designer

2.5 h

1 plate

5.0(3)

0.2mm layer, 4 walls, 15% infill

Designer

4.3 h

1 plate

5.0(3)

Boost

Released

Description

Perfect Sign for all the Gun and Coffee Fans!

Recommend keeping Faceplate scaled as is to avoid fitment issues
(Tried going back into Fusion to rescale properly and file corrupted so keeping it as is for now)

Recommend using 4 Walls on backplate to avoid seeing Infill pattern unless backplate is BLACK

-Includes hole in backplate to hang on wall

-5mm hole on bottom to route usb cable

Products Used

USB-C Port

https://a.co/d/b0Xj1dy

On/Off Power Switch

https://a.co/d/eeLkvvl

LED STRIP

https://www.aliexpress.us/item/3256805418955042.html?gps-id=pcStoreLeaderboard&scm=1007.22922.271278.0&scm_id=1007.22922.271278.0&scm-url=1007.22922.271278.0&pvid=8aaffbc9-c844-4cd5-aac2-67d371dde3b0&_t=gps-id%3ApcStoreLeaderboard%2Cscm-url%3A1007.22922.271278.0%2Cpvid%3A8aaffbc9-c844-4cd5-aac2-67d371dde3b0%2Ctpp_buckets%3A668%232846%238112%231997&pdp_npi=4%40dis%21USD%215.17%213.57%21%21%2136.94%2125.49%21%402103246417069718679853726e1bdd%2112000033730029594%21rec%21US%212898633292%21&spm=a2g0o.store_pc_home.smartLeaderboard_2005589589965.1005005605269794&gatewayAdapt=glo2usa

Switched USB Cable with stripped Ends

https://www.amazon.com/SinLoon-Stripped-9-Speed-Dimming-Devices/dp/B09LCTB6LW/ref=sr_1_1?crid=1KUAO6ARB2UKP&keywords=Sinloon+USB+Male+with+On%2FOff+switch&qid=1706972219&sprefix=sinloon+usb+male+with+on%2Foff+swit%2Caps%2C317&sr=8-1

Comment & Rating (12)

@SydeShowJoe

Print Profile

0.2mm layer, 4 walls, 15% infill

Great Print! Turn off AUX fans :) Also, would recommend adding a rectangle hole large enough to secure a usb cable (led lights) for easier access.

The designer has replied

@DREWZUKI

Thank you for the rate and response! The profile on these were some of my first, So I have another profile that disables the AUX fans and reduces print time slightly while improving quality. Thanks for reminding me to re update the profile. I'll also add a cable led cutout to run the strip through for those who don't solder their own together.

@SydeShowJoe

Print Profile

0.2mm layer, 2 walls, 8% infill

Great Print! Printed great after i turned off AUX fans... One recommendation is to add a rectangle hole the usb cable for LED light, to fit through casing.

The designer has replied

@DREWZUKI

Thank you, Ill start doing that with my models. appreciate the feedback.