Retractable karambit knife designed based off CORRUGATORSUPERCILII cat claw box cutter and @OcularDynamic.
I started from scratch in Fusion because the design had some flaws in my opinion. I doubled the amount of magnets and made some form changes. All the parts are a bit thicker to accomodate nyloc m3 nuts and increase robustness.
I added a .STEP file :)
I print everything in PETG. I recommend to print at least the hinges in PETG or ASA.
Filament i used:
Blue: Zortrax Z-glass
Yellow: Fiberlogy Easy PETG
Assembly Parts
For Body:
4x - M3x20mm screws
4x - M3 Nyloc Nuts
For Blade:
2x - M3x5 Screws
2x - M3 Nuts (flat, without nyloc)
Magnets:
6x 6x3mm