Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Sunlu Grey Transmission Distance: 2
    PLA+ Esun Brown Transmission Distance: 1.5
    PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Grey
    At layer #12 (1.04mm) swap to Brown
    At layer #14 (1.2mm) swap to White for the rest.