Voronoi Multi Box (twist to open bowl) by GlennovitS 3D

GlennovitS 3D

Household>Decor

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

ORIGINAL - Voronoi box (updated!)

Designer

10.7 h

6 plates

4.8(5)

Boost

Released

Description

Updates

25. Jan 2024 - 3 new sizes available!

Want the beautiful organic look of voronoi AND the functionality of a twist-to-open box - then print this! Can be used as a bowl, stand or open container OR as a closed box - just twist to change!

Overview

The model consists of 2 parts - ‘Box’ and ‘Voronoi Lid’. They come in multiple sizes. You can print the smallest one to test it out, before printing a bigger one :-)

It comes in the following sizes:

Tiny (Dia: 30 - Height: 30 - great for testing it out)
Mini (Dia: 35 - Height: 35)
Small (Dia: 61 - Height: 40)
Medium (Dia: 81 - Height: 50)
Large (Dia: 113 - Height: 70)

Follow for more to come!

Assembly

That’s easy - print box + lid, and screw them together.

It might be a little tough to screw together in first try depending on the print quality - but repeat some times to help. And maybe clean the voronoi lid on sharp edges.

Print instructions

The Box is simple to print. But there is one tip:

Supports: No - not needed. (But the box has some bridging to make the handle on the bottom - printed just fine on my Bambu Lab P1S without supports)

Regarding the Voronoi Lid is a few tips here:

Supports: Yes - tree supports. (To support the different angles of the patterns. Requires some clean-up afterwards)
Speed: Low-medium (Depending on the printer, maybe slow it down, to keep the small areas stable while printing)
Orientation: The models are oriented in the correct print position

Happy printing!

Want to show your support?

You can see ALL my designs on Printables - and you can become an active supporter. I would really appreciate it!

https://www.printables.com/@GlennovitS3D#join

Comment & Rating (12)

@user_1413529682

Boosted

Print Profile

ORIGINAL - Voronoi box (updated!)

Finally figured it out due to a little help from a friend and it looks great. I’m still taking off the supports from the bottom, but it worked great

(Edited)

The designer has replied

@GlennovitS3D

I see that those doesn't look too good.. The profile worked just fine on my machine. An alternative option is to activate supports (auto) when printing that part. Those supports should be fairly simple to pull of afterwards, and should leave a better finish. If you decide to try, please share the results - hoping it will be better 😄

@user_1413529682

Boosted

Replying to @GlennovitS3D :

thanks so much I knew there had to be a solution I will print again and post results later today 😊

@GlennovitS3D

Replying to @user_1413529682 :

Hoping to see better results this time then 😉

@Makers_Manifest

This is really cool!

The designer has replied

@GlennovitS3D

Thanks. Just finished it yesterday 👍🏼

@F4FBLACK

Print Profile

ORIGINAL - Voronoi box (updated!)

@hopkins3030

Print Profile

ORIGINAL - Voronoi box (updated!)

@CoastJRA

Print Profile

ORIGINAL - Voronoi box (updated!)

@yonkeltron

Print Profile

ORIGINAL - Voronoi box (updated!)

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.