Modular Slidey Storage Pod

Features:

• 3 Shelves For Storage
• 1 Full Pod Prints In Under 9 Hours
• Easy Assembly
• Sliding Door
• Stylish Design
• Great For Use As A First Aid/Medicine Cabinet
• Can Be Colour Coded For Different Purposes
• Perfect For 3D Printer Parts, Adaptors, Cables, SD Cards, USB Sticks, Scrapers And Anything Else That Will Fit!
• Easy Removal From The Wall For Simple Loading, Unloading And Organizing
• Modular System That Can Be Mounted In Horizontal And Vertical Rows (Single And Double Mounts Included)
• Strong And Reliable Storage Solution
• Can Be Printed On An A1 Mini
• 3 Different Labelled Doors Included - ‘Parts’, ‘Tools’, ‘First Aid’

Assembly:

• Glue the ‘Shelves’, ‘Side Left’ and ‘Side Right’ together.
• You only need to add glue to the very edge of the shelves and then seat them in the slots in each side piece.
• Once the glue is dry, insert the door through the grooves that are cut in the door channel
• Ensure the door is in the correct orientation as it slides in from back to front
• Slide the door all the way round its channel until it meets the stop at the front
• Insert the 2 small stop pieces to close off the door channel. This is optional as once mounted on the wall, the door handle acts as a stop.

Assembly should take no more than 5 minutes.

During assembly you must ensure all edges of the shelves are seated into their corresponding slots. If they are not all the way in then the sliding door will not function correctly.

Add some lubricant to the slots that the door slides in, for a smooth motion. I use silicone grease and it works great.

Tip: You can make the pod any width you like! - You just need to scale the shelves and the door up or down in Bambu studio.

• To do this, scale both parts in the X-axis only and ensure the door is always 2.9mm narrower than the shelves.

This design is the first version I have made of this concept - If you have any issues or recommendations for edits or additions, please leave a comment or message me! I'm open to constructive feedback to make this as good as it can be :) - It would also be good to add some additional features that users may want to see in the future. I already have some ideas, but would love to hear what you think too!

Thanks for looking!

Please share your makes with this one! - I had a fun time designing this and am very happy with how it turned out.

Also, please rate and review your printing experience :) - It helps my designs get seen by more people :P