The magnificent Mickey Mouse is free of copyright after 90 years!
Here's a lithophane postcard of a still from the iconic cartoon.
I was careful to make a version that is beautiful to look at even with the lights off!
The dimensions are compatible with the light box sold on Tiger shop
________________________________________________________________________________________________________________
ATTENTION!
You can scale it but not uniformly, only X and Y need to be changed
________________________________________________________________________________________________________________
INSTRUCTION:
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.12mm
Filaments Used:
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Black Transmission Distance: 0.6
CLEARER
Swap Instructions:
Start with Ivory White
At layer #3 (0.24mm) swap to Silver
At layer #7 (0.48mm) swap to Black
At layer #9 (0.6mm) swap to Black for the rest.
DARKER
Swap Instructions:
Start with Ivory White
At layer #3 (0.24mm) swap to Silver
At layer #13 (0.84mm) swap to Black
At layer #14 (0.9mm) swap to Black for the rest.