Box for tetris game with lid
Copyright Claim
Box for tetris game with lid
Boost
31
54
14
Print Profile(1)
0.2mm layer, 2 walls, 8% infill
11.3 h
2 plates
Boost
31
54
14
0
159
67
Released
Description
Box with lid for tetris game Tetris balance game by ATTV85 - MakerWorld
you need 2x bolt DIN912 M3x20 and 2x nut M3
Comment & Rating (14)
All
Print Profile
0.2mm layer, 2 walls, 8% infill
beautiful
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
great print! I think I added to many supports, but it still looks good! thanks for sharing!
0
Reply
i printed the game pieces, box and everything. how ever the pieces are extremely tight in the box. i am going to reprint the game box at 101% and try again
The designer has replied
0
Reply
originally there is 0,2 mm space for each side. I print it and it is OK
0
Reply
but also dippend on filament type…I use Babulab PLA Mate
0
Reply
maybe that is the difference between classic and arachne walls. I used arachne. also .4 nozzle and reduce infill retraction
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
Box is too small for the pieces
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
Fits perfect. The Supports are a challenge 😂
0
Reply
Very Sturdy build. The latch could use some lateral stiffness, or maybe I just need to sand the pegs a bit, but mine tends to come loose easily. Also, the bolts needed are M3x20 or they won't fit through.
0
Reply
This would be a cool game to print. Easy too.
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld