Valentines Dragon Egg with Threads by Simple Solutions 3D

Simple Solutions 3D

Toys & Games>Other Toys & Games

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

PLA Profile - TESTED

Designer

3.6 h

1 plate

4.9(18)

150% PLA Profile - TESTED

Designer

7.6 h

1 plate

5.0(4)

PLA Profile - A1 Mini

Designer

4.2 h

1 plate

Boost

249

301

746

357

Released

Description

You do not have the right to sell this file or any prints of it. You do not have the right to distribute the files. If you wish to share, please provide the link to this page. If you want commercial rights, be sure to check out my listing on Cults3D.

The Valentines Dragon Egg is the perfect home for your favourite 3D printed dragon! As the next version of my original Scaly Dragon Egg with Threads this one features hearts as the scales! As always the overhangs can be printed for a smooth finish, and the two pieces have an addictingly easy to open and close thread ensuring a perfect alignment every time!

100% scale fits two Cinderwing3D Tadlings

150% scale fits a full size Cinderwing3D Dragon.

125% scale fits a 125% Crystal Dragon.

If you find what size fits other models, please comment and I'll update the description with credits to you.

Comment & Rating (37)

@dargoh30

Print Profile

150% PLA Profile - TESTED

UPDATE:I managed to fit the Rose dragon in the egg....it is really tight fit but it does go in. Great design, printed perfect threads are 100% perfect for alignment. Unfortunately it doesn't fit the full size rose dragon by ciderwing, I am afraid if I scale it to 175% to fit the dragon the threads might not line up any more and I hate to waste 8 hours just to find out.

(Edited)

The designer has replied

@SimpleSol3D

I Haven't tested it with the rose dragon yet, but thank you for the feedback. My testing has found the threads line up at ever scaled tested including at 40%. I'd imagine 175% would work too based on my results.

(Edited)

@dargoh30

Replying to @SimpleSol3D :

Yes I can confirm that the full size Rose dragon fits....the trick is to flip the egg up side down and put the dragon head first on the top part of the egg then screw the botom part of the egg on it....just make sure don't cross thread the two parts, if the threads try to cross thread just shake the egg a little and the dragon will work it self in there to line up the threads. Thank you for the upload...fantastic print. I don't know what sorcery you used but the two parts always click aligned perfectly 😁

(Edited)

@McFlyOrPie

Where did you find the rose dragon? My wife wants me to print the heart egg and the rose dragon for our daughter for valentines.

@kevin.j.gallagh

I've printed about 10 of these with no problems, then all off a sudden I've been having problems in the last 30 minutes or so. Any ideas? Changed the hot end but still having issues.

The designer has replied

@SimpleSol3D

That's very strange. I would check filament diameter and see if it's getting stuck somewhere. Also check your extruder.

@hawilli12344

Print Profile

PLA Profile - TESTED

already made 4 it's great

@bebrule

hey could you add the dragon. it’s supper cool

The designer has replied

@SimpleSol3D

The dragon is from Cinderwing3D and requires you purchase it for personal use or license for commercial. I am not permitted to share the files.

@bebrule

Replying to @SimpleSol3D :

ok thank you

@Joni.sperry

could you please add the a1 mini to the printer profile? If it isn’t selected it won’t let me print it even though it should fit. super cute! thanks

The designer has replied

@SimpleSol3D

I'll see about doing this tonight for you. Stay tuned!

@SimpleSol3D

Uploaded!

@geoppner

what creator or how did you print the miny crystal dragon

(Edited)

The designer has replied

@SimpleSol3D

That is the Crystal Tadling by Cinderwing3D. I believe it's a Patreon exclusive (at least that's how I got it). might be on Cults

@rob.burnett1993

Print Profile

PLA Profile - TESTED

looked great in silk pls. little sad the egg doesn’t screw all the way down.

The designer has replied

@SimpleSol3D

@rob4747 Can you share more details and maybe some pictures? I tested this extensively and it always screwed down all the way with perfect alignment. I'd love more info to try and help troubleshoot your problem.

@jishaw32

Print Profile

PLA Profile - TESTED

I think they do pretty well. thank you

@user_2751315529

Print Profile

PLA Profile - TESTED

Default profile was good, though a .12 or .16 layer height is appreciated especially as you get near the top of the egg. If using a rainbow or similar gradient filament, then I suggest printing the egg 1 piece at a time for a more continuous color transition.

@patrickcropsey

Print Profile

150% PLA Profile - TESTED

awesome print

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Dragon scale egg-buckle version(龙鳞蛋-卡扣款)

Print Profile(3)

Description

Comment & Rating (37)

License

Related Models

Dragon scale egg-buckle version(龙鳞蛋-卡扣款)

Large Threaded Dragon Egg Remix 200%

龙鳞蛋（带卡扣）-关节龙组合

Dragon egg candle