this is a remix of xTouch enclosure from TeachingTech @TeachingTech
https://www.printables.com/model/611634-xtouch-enclosure-for-bambu-lab-p1ps

I aded xTouch spacer from johnstylez for you convinience

https://makerworld.com/en/models/49439#profileId-51313

I modified original file to use M3 inserts and add logo of the CAD/CAM TopSolid. Blank mount is also included.
In the "Raw model files" you will find STP models for futher remixes

Hardware:

8x Threaded insert M3x5x4 “Voron”

8x M3x14 countersunk head screws

1x 2.8 Inch Display Screen ESP32

Instructions

Original video

GitHub xtouch by experiments

!!!!!! WARNING !!!!!

You will need to dismount display PCB (4 screws) which is behind the display inside the printer, to be able to slip the USB cable thru the slot. I also had to shave a little bit of the micro USB conector.