HUEFORGE - Bud Spencer the Legend
Copyright Claim
HUEFORGE - Bud Spencer the Legend
Boost
4
11
3
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
2.9 h
1 plate
Boost
4
11
3
0
29
15
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Sunlu Matte Grey Transmission Distance: 0.5
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
Start with Charcoal Black
At layer #12 (1.04mm) swap to Matte Grey
At layer #14 (1.2mm) swap to Ash Gray
At layer #16 (1.36mm) swap to Cotton White for the rest.
Slicing will take a while but outcome will be great, see the picture of the print
Comment & Rating (3)
All
Print Profile
0.08mm layer, 2 walls, 100% infill
Einfach nur geil
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
1
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld