This is part of a series of Macbeth images I will be uploading. My wife is an English Language Arts teacher and will be using these in her classroom as part of the lesson plan.

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display.

Final Size is 200x200mm
If you resize the model from 200 x 200 make sure you do NOT scale the Z axis or the print colours will not be in the same position

Please post a picture of your printed copy! I'd love to see it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu Black Transmission Distance: 10
PLA Overture Red Transmission Distance: 5
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA Overture White Transmission Distance: 3

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #11 (0.96mm) swap to Silver
At layer #26 (2.16mm) swap to White for the rest.