Mini Heart String Decoration by Lilac Rage

Lilac Rage

Art>Sculptures

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Arachne Mode - 0.2mm layer, 2 walls, 15% infill

Designer

1.4 h

2 plates

4.9(38)

[Mini-Friendly]: 0.2mm layer, 2 walls, 15% infill

30 min

1 plate

4.8(15)

A1 mini - 2 colors & single color, 0.2mm layer, 2 walls, 15% infill

1.4 h

2 plates

4.7(9)

Boost

146

314

320

Released

Description

Mini Floating Heart String Decoration

I created this model as a test to see if I could make my own string art print. After much trial and error, I got it down, and I'm very happy with the results.

The single color version prints in about 25 minutes and the two color version prints in under an hour.

You MUST use arachne mode to print this correctly. Slicing with classic wall generator will cause this model to fail!

DO NOT Resize this model. The strings ONLY work at the scale it was modeled at. If you change the scale in any direction, it will NOT work.

If you want a different size, please leave a comment and I will try to upload a new size for you.

This model is released under a Standard Digital File License. If you are interested in a commercial license, or just want to support me creating new models, check out my patreon.

Thanks, and happy printing!

Comment & Rating (67)

@fab511

Perfect

@AshOcelot

Nice idea!

@ETW_3DP

Great Design!

The designer has replied

@LilacRage

very nice!

@user_2962414880

Print Profile

[Mini-Friendly]: 0.2mm layer, 2 walls, 15% infill

Works good!

@VIVI_66

Print Profile

[Mini-Friendly]: 0.2mm layer, 2 walls, 15% infill

MINIMAL amount of stringing. Aside from that real clean

(Edited)

@Hoven

Print Profile

A1 mini - 2 colors & single color, 0.2mm layer, 2 walls, 15% infill

Came out perfect on my A1 Mini!

@mr_kreativstube

Print Profile

[Mini-Friendly]: 0.2mm layer, 2 walls, 15% infill

Super Druckergebnis

(Edited)

@AshOcelot

Print Profile

Arachne Mode - 0.2mm layer, 2 walls, 15% infill

Printed perfectly!

@fab511

Print Profile

Arachne Mode - 0.2mm layer, 2 walls, 15% infill

very good

@FinnishHer

😁

@Userfrom666

Print Profile

Arachne Mode - 0.2mm layer, 2 walls, 15% infill

nice ;)

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.