Please consider casting your Boost token if this model/design helps you, and don't forget to press the like button. Many thanks!

Makerworld has significantly reduced the download/print points awarded to designers. Instead, they have introduced the "Boost" token, which you can apply to models that may not be the most popular (already gaining points from downloads and prints), but are useful or meaningful to you in general. This supports and encourages us, the "losers" (those not focusing on popular themes like Star Wars, car keychains, countless airless balls, etc.), to create more useful or niche designs.

REMCRS: Rapid, Economical, Modular Customizable, and Rotatable Storage

Don't be shy; go ahead and hit that like button ;)

Fully compatible with A1 Mini, this rotatable storage system is modular, expandable, and customizable.

Key Features of REMCRS:

Rapid Manufacturing: All components are designed for printing in vase/spiralize mode without the need for supports.

Economical: The vase mode allows for minimal filament usage and eliminates waste in support materials.

A pen/pencil holder and four spacious storage decks with unique compartmentalization: Choose and mix-match from these four options, each equipped with unique dividers to meet your organizing needs. You can adjust the height in the slicer (Z-axis size only) for each storage deck and have your own storage settings. The pen holder/cylinder acted as the axis for rotation can accommodate 80mm decks (default: #1 30mm, #2 20mm, #3 20mm, and #4 10mm) and a 2mm cover.

Expandability: You can adjust the Z-axis of the pen holder to shorten or increase the height for more decks, but remember to add 2mm for the cover if you need one.

For a much stable assembly, I Ihighly recommended to glue the first deck to the cylinder. You will find a small protruding at the bottom of the cylinder; align the notch of the first deck to it and apply super glue to the inner rim of the first deck.

Wait until the glue is dry, insert the rest of the deck and the lid. And lastly, put on the cylinder cover; if you are not going to change the combination, I suggest also gluing the cover to the cylinder for better stability.

Print Requirements: If you are unfamiliar with vase/spiral mode, please use the profiles provided. The profile uses a 0.8mm line width for printing a 3-layer bottom and a single-walled item.

Also, have a look at my other designs at https://makerworld.com/en/u/3720285194 and to complete your desk organizing experience with:

The REMDS80 and REMDS160 modular drawer system
The REMHSS modular hexagon storage system
The Customizable calendar and desk organizer.