Utility S - case by sipura

sipura

Tools>Organizers

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Battery packout 0.2mm layer, 2 walls, 12% infill

Designer

9 h

3 plates

5.0(54)

Fuse packout 0.2mm layer, 2 walls, 12% infill

Designer

10.5 h

3 plates

5.0(4)

Battery Version A1 Mini 0.2mm layer, 2 walls, 12% infill

10.6 h

4 plates

5.0(3)

Fuse Version A1 Mini 0.2mm layer, 2 walls, 12% infill

12.4 h

6 plates

5.0(1)

Click to see more

Boost

312

614

117

921

965

Released

Description

Hello,

UPDATE 26/1/2024:

You can check you our new model, same like this one but XL bigger. Inner containers are compatible.

https://makerworld.com/en/models/157759#profileId-173134

Our new model of the utility case, its little bit smaller and more compact that previous one.

Simple and fun print.

All parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.

We made the first profile with inner boxes in which you can store 15pcs AA batteries, 15pcs AAA batteries and 2pcs 9V batteries.

The second profile is the same as the case, but with 3 internal fuse boxes 20x5 that you can put away.In the first two, you can store 150 pieces of 20x5 fuses, and in the 3rd lowest box, you can also store a couple of fuse packs.

Also the internal storage boxes are compatible with those of the larger model, which you can find at the link:

https://makerworld.com/en/models/132417#profileId-143543

To assemble one case, you need:

6pcs M3 nuts

1pc of screws M3x30

2pcs of screws M3x18

I hope you like it, and enjoy printing and using this useful case.

I expect your pictures of printed models in the comments :D

Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.

Enjoy printing :D

Comment & Rating (117)

@danregazzi

Boosted

Print Profile

Battery packout 0.2mm layer, 2 walls, 12% infill

I love this battery case. I had a little bit of warping on most of the corners, but it's still fully functional. I can't remember the last time I've even seen a 9-volt battery and have absolutely no need for them any more so I modified the insert slightly to add more AAA slots.

The designer has replied

@sipura

Thank you :D

@teammatthias

9 volt batteries for smoke detectors, mostly. We carry extras in the RV. Extra smoke alarms in the home as well us the 9 volt.

@lebrizio

Hi @danregazzi Can you share the project with the modification without the 9v holes? :)

@theStraenger

Print Profile

Battery packout 0.2mm layer, 2 walls, 12% infill

Encouraged by the "standard" version decided to print this one as well. Again, perfect results. If you are looking for more toned colors, I would encourage white case with black details, works very well in my print. EDIT: added photos from the comment below

(Edited)

The designer has replied

@sipura

Thank you Feel free to put some photos :)

@theStraenger

Replying to @sipura :

Actually why not. A few remarks: - "standard" version printed with 80 scaling - this scale allows to hold all standard printer accessories perfectly. - "S" version printed on the smooth bed plate for nicer finish EDIT: - no gasket in both versions, just as I finished preparing TPU for print I noticed that everything fits perfectly (as many people mentioned already ;) ) so decided to skip that part

(Edited)

@sipura

Replying to @theStraenger :

That looks really nice... I also think maybe make some new inner container just for these accessories :D

(Edited)

@faccinandrea

Print Profile

Battery packout 0.2mm layer, 2 walls, 12% infill

ne ho gia stampate 3 e tutte le stampe sono venute perfette! ottimo lavoro!👏👏

(Edited)

The designer has replied

@sipura

Thank you, and thanks for photo :D

@faccinandrea

grazie mille! buone stampe!

(Edited)

@Matinal

Thank you very much. I said this would be my first model in 2024, and I did it. Instead of printing the small one, I chose this battery box. The size is perfect and the switch is very smooth. You are such a genius, thank you again.

The designer has replied

@sipura

Thank you very much, I appreciate it :D

@Matinal

For this model, I specially bought TPU filaments to print sealing strips; I didn’t wait for the TPU filaments to arrive before commenting. I really like it so much.

@teammatthias

Print Profile

Battery packout 0.2mm layer, 2 walls, 12% infill

Battery Box is great size and pretty good. Only issue is the step/lip on bottom of insert, caused failure so I cut it off in slicer. Odd length screws compared to most other boxes out there, but we made it work. Colors not showing well in pics, but are copper over black. Box is great size for spare batteries in RV. Thank You for making and sharing, much appreciation!

The designer has replied

@sipura

Thank you :)

@ReturntoSender7

Boosted

Print Profile

Battery packout 0.2mm layer, 2 walls, 12% infill

Love these boxes! this one is to hold all the little charging wires in my van

The designer has replied

@sipura

nice, thank you :)

@simon.zoloiev

Print Profile

Battery packout 0.2mm layer, 2 walls, 12% infill

I have been looking for a storage solution for my batteries for a long time. I wanted something more than just individual "stack-em" type boxes. Other storage options didn't offer the combination of batteries that I mainly use. I loved this design and even went as far as to replicate the green and silver color combination.