Marble Run 003 Motor and Cable Protection
Copyright Claim
Marble Run 003 Motor and Cable Protection
Boost
19
36
19
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
52 min
1 plate
Boost
19
36
19
0
123
67
Released
Description
With the original Marble Run 003 motor cover, the motor is partially free and there is no clean cable management.
This cover protects the motor and the cable.
Interested in more Marble Run items? Check out https://makerworld.com/en/@mplusm
Comment & Rating (19)
All
Hi MplusM. What orientation should this be printed in? I tried to print the way it is oriented in the 3mf file; however, the large flat part shown in the screenshot went spaghetti. Thanks!
The designer has replied
0
Reply
Hi RevelRob. Thank you for bringing that to my attention!! Without support… this doesn’t work. I forgot to turn on support 🙈. Please try the new print profile version 2.1 and sorry for the inconvenience caused.
1
Reply
awesome! thanks! p.s. check your dm 😁
0
Reply
good idea but doesn't actually fit. it's not long enough to cover whole motor and the cable holder sits behind where the cable actually comes out. needs some tweaking and resizing
The designer has replied
0
Reply
First lead the cable back and then forward again in a loop. It's a bit fiddly and you have to be careful not to squeeze the cable.
1
Reply
unfortunately mine won't do what you show. the wires coming out of the motor go straight out and not to the side so the wire holder does not fit over them...it's too short in length
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
easy print that fits well on the marble run motor!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Perfect
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
easy and usefull
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
0
Reply
Thanks! 😀
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld