Pegboard Multigrid Bins for Multiboard by SOME Studio

SOME Studio

Tools>Organizers

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

Standard Multiboard Settings

Designer

7.8 h

7 plates

4.7(6)

Boost

120

Released

Description

I remixed the standard Multiboard (https://multiboard.io/) Multigrid bins to not need anything except a vertically mounted basic Multiboard tile. The bins mount using the pegboard holes so they can be removed easily as well. After printing cut away the built in supports.

The sizes are

0.25U = 15.5 mm
0.5U = 26.4 mm
1U = 48 mm
1.5U = 69.7 mm
2U = 91.3 mm
2.5U = 113 mm
3U = 135 mm

Post-Process:

Comment & Rating (8)

@savagedad

Print Profile

Standard Multiboard Settings

these are awesome. perfect fit. any way to make larger (wider) bins? a 2x or 3x would be great!

The designer has replied

@SOMEStudio

Thanks for the review and feedback. I should be able to make wider bins.

@user_1438295386

Replying to @SOMEStudio :

+1, this model is great. Wider options would be even better.

@CELDesign

Print Profile

Standard Multiboard Settings

Needed a variety of Multiboard bins so decided to give this one a go. Prints well. My only issue is the post processing of the pegs. Also the bins use quite a lot of filament and print times especially when printing five or more at a time. So in the end, I ended up designing my own with reusable pegs and thinner walls for print speed and minimal filament use for my personal needs. https://makerworld.com/en/models/417644#profileId-320035

(Edited)

@Tellervo

Print Profile

Standard Multiboard Settings

Prints well.

@hartmann82

Print Profile

Standard Multiboard Settings

@TheAlbino

Print Profile

Standard Multiboard Settings

First print I attempted had bed aadhesion issues. Not sure if it was a print profile error or a filament issue. Second print was almost flawless, although there where some rough spots near the edges and ridges. With a bit of sanding , the print turned out great.