Nintendo NES Controller "Slide Box" Desktop Organizer by LemonArts

LemonArts

Household>Office

GIF

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

[original] 0.16mm layer, 2 walls, 15% infill

Designer

2.8 h

1 plate

4.8(35)

[large] 0.16mm layer, 2 walls, 15% infill

Designer

5.5 h

1 plate

4.7(3)

0.16mm layer, 2 walls, 15% infill

2.9 h

1 plate

5.0(3)

A1 Mini - 2 Plates - 0.16mm layer, 2 walls, 15% infill

2.4 h

2 plates

5.0(2)

Boost

320

480

419

375

Released

Description

Here is my new Design of the Original Nintendo NES Controller as an Desktop Storage.

two Versions aviable:

- Close to the Original Size (A1 Mini compatible)

- Large Version (X1,P1,P1s, A1)

AMS compatible.

Attention !!!, my profile is designed for the Bambu Support Filament. If you use normal PLA as support, provide it

Comment & Rating (59)

@FabDragons

Print Profile

[original] 0.16mm layer, 2 walls, 15% infill

Looks Great! I made an A1 Mini profile, I'll add it

@FabDragons

Replying to @OuijaWitch :

I noticed it was a bit difficult but the support material came off. I didn't change any print settings so I'm not sure how you had different supports after transferring it yourself. sorry you had a bad experience. I'll see what I can do to tweak it

@OuijaWitch

Replying to @FabDragons :

I sliced your and the supports look different then the one on mine and the one from the OG profile, I have them side by side as well on my PC screen, yours are solid and the creators are not. :( I deleted my comment cuz people like to bully others on here, wasn't sure if Id get harrassed after all this specific community is very very toxic.

@OuijaWitch

To the left is the profile I used and the right is yours--see the support how it is solid? Ultimately someone printing this would just assume the lid is too big, like I did due to the support looking like it isn't there and removing it just messes up the track and makes it nonusable.

@FinnishHer

Nice model. Made with A1 Mini and AMS Lite. I didnt know that one can choose color of the support as i havent used them yet. So i got red line there, and the support is so tight that couldnt remove all of them. So the lid is quite tight. Octagram spiral surface on the bottom and top, just trying for fun that how they look😁

(Edited)

The designer has replied

@icecube111

I Use the Support Filament from Bambu. When i Use other Filament, set the z Layer high between model to 0.2mm. With the Support Filament is 0.00

@FinnishHer

i didnt even had the idea of check the option for that cos i didnt think about supports at all because havent used them for 2 weeks that after got the machine.

@user_3586368438

Print Profile

0.16mm layer, 2 walls, 15% infill

turned out amazing! the dovetail fits perfectly!

(Edited)

@julianfj

Print Profile

[original] 0.16mm layer, 2 walls, 15% infill

Alucinante el resultado

@ganinghell

Print Profile

[original] 0.16mm layer, 2 walls, 15% infill

Hab die Box lediglich etwas vergrößert. Hab dort nun Hotend usw. verstaut

@dedan83

Print Profile

[original] 0.16mm layer, 2 walls, 15% infill

Cool idea. I like it. Print profile does what it should.

@SaiLentKnight

Print Profile

[original] 0.16mm layer, 2 walls, 15% infill

Prints well. I had no issue with support removal 👍

@caj380

Print Profile

[original] 0.16mm layer, 2 walls, 15% infill

Awesome model! Looks just like a real NES controller and works perfect for storing SD cards and stuff on my desk! I highly recommend using a support interface material like is recommended in the profile. I tried to print it without a support interface material and the supports fused to the print. I tried it again and used petg as the support interface material for the pla and it worked great!