TCG Deck Box Stackable

TCG Deck Box Stackable

Boost
50
65
20
GIF

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
4.8 h
1 plate
4.5(10)

A1 mini
A1 mini
8.4 h
3 plates

Boost
50
65
20
2
127
147
Released

Description

Model

Features

Magnetic Sliding Lid: The deck box has a magnetic sliding lid that securely snaps into place, ensuring the safety of your sleeved deck. This feature provides easy access while keeping your cards protected.

Versatile Dice Tray Insert: Accompanied by a dice tray insert, the deck box offers a convenient space for your dice, counters and other game accessories. The tray is removable, allowing you to create more room for additional cards when needed.

Space-Efficient Lid Storage: The lid cleverly slides off and can be stored directly underneath the box. Secured again by magnets, this design minimizes the space it occupies in your playing area, ensuring a clutter-free gaming experience.

Stackable Design: Magnets embedded in both the base and lid enable seamless stacking of multiple deck boxes. This innovative feature not only facilitates easy storage but also enhances maneuverability, providing a tidy and organized gaming space.

Top Loader Display Slots: The deck box features strategically placed slots at the front and back for top loaders. Showcase your favorite cards, deck lists, or ink types, eliminating the mystery of what's inside each box.

 

The magnets used are 15×5×3mm, the deck box will function without these but some features are lost.

Comment & Rating (20)

Please fill in your opinion
(0/5000)

Great print, very useful. I did notice some other comments saying their top loaders didn't fit, and so far out of the 2 I've printed, 1 is having a fit issue as mentioned (printed in white) while the black one was perfect off the plate. Same brand (Elegoo) PLA. I have a feeling the reports of fitment issues are due to filament and not the model/profile. I also printed 1 of the Lorcana boxes by warrell72 in blue, which also fit perfect off the plate. Not pictured is the white one, as I try sanding before reprinting at 100.5%
0
Reply
Did a second white one using a different spool of the same Elegoo PLA bought at the same time as the other one, and things are fitting fine! Must be too humid :-/
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
la verdad que muy bien, quedan perfectas las fundas top loader para la carta principal y yo llevo las cartas con doble funda y para mazos de 50-70 cartas va perfe
0
Reply
buenas, que grosor de toploader usa, que estuve mirando y hay de 35pts a 360pts, muchas gracias!!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
the little box is hard to put inside . but my daughter will be happy.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Doesnt fit a commanderdeck with the indsert with it. But then again if it does it would be to big. Nice desing though
The designer has replied
0
Reply
Hey Nick, I’m not a Magic player, how far off is it? I know you can use without tray but would a smaller tray allow for both or would it be so small as to be redundant?
(Edited)
0
Reply
Replying to @warrell72 :
If the tray is left out. It fits. But don't break your head around it man. It's a very cool design. is you have to change it to Magic standards it cost a whole roll of filament and it gets to big. Now i'm thinking of it. you can add a tray under it. Because the size is good as it is to hold. You only can add height to it.
0
Reply
Replying to @NickR1983 :
nick could post the specs for mtg revision of box? tbh im printing with out tray it dose let room for tokens i just wondering how high box needs to be
0
Reply
can someone giv me a link for the front display card. great design
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed great, thanks for the deck box!
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
amazing deck boxes
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Other Issues:so the one side the top loaders fits perfect but the other side it doesn't go all the way down so just a tiny part sticks up and the lid won't go on
The designer has replied
0
Reply
Hey Buddy, the qc on top loaders is it great, would you swap the front and back ones around and see if the issue moves? if so the issue is the top loader not the print. try a new top loader to solve the issue
0
Reply
I have tried swaping. I have tried 10 other top loaders all same issue on that one side
0
Reply
would it be possible for you to change the size of the magnet inserts on this model or can you make it with no magnet insets and I can add in via negative parts in studio. thank you. very good design
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply