Added a simpler verison of the orginal Buffalo Bills logo I made in hueforge. Will only run through the colors 1 time

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5.1

Swap Instructions:
Start with Black
At layer #6 (0.88mm) swap to Blue
At layer #13 (1.44mm) swap to Red
At layer #19 (1.92mm) swap to Jade White for the rest.