Mounting setup for LRS-350-24 to MK3 Printer.

Required Hardware:

(2) M4 x 8 button head screws to mount P1 to frame
(2) M4 nuts to mount P1 to frame
(2) M4 x 6 button head screws to mount LRS-350 to P1
(1) M4 beveled screw from original power supply to mount P2 to LRS-350
(2) M4 x 5 button head screws to mount P2 to LRS-350
(4) M3 Square Nuts from original power supply P3 to P2
(3) M3 beveled screws from original power supply P3 to P2

Power switch, Power adapter and wires from original power supply. Note for my setup the wiring was just barely long enough but I'm using an Einsy case with access on the outside of the printer so I need a little more length than the stock Einsy case.

Print instructions

No supports needed