On Air Sign Lightbox Swappable Plate by rky.91

rky.91

Art>Signs & Logos

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

47 min

1 plate

5.0(4)

Scaled down 80% on X,Y axis for A1 mini, 0.2mm layer, 2 walls, 15% infill

39 min

1 plate

Boost

Released

Description

This plate design is meant to be mounted with my Engineered Lightbox Frame.

This solution allows to use different designs printing exclusively the desired front plate.

I also created a container for the plates design that also functions as a riser for the lightbox itself.

Remember to check out my collection of swappable front plates for new designs.

Feel free to try different color combination.

Comment & Rating (9)

@poieties

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed perfectly, thanks!

@dropper

it’s probably my filaments, but I was wondering if you could design them with perhaps an extra layer all over the back? The reason I ask is that I keep having issues, slight or major, where the letters pop out of the main part of the sign.

The designer has replied

@rky.91

Im not sure. but maybe is possible to scale the height of the model directly in bambu studio. Can you try it?

@dropper

Replying to @rky.91 :

yep, will definitely try! again, great models.

@dropper

Replying to @rky.91 :

Hey! Just wanted to let you know that I tried a couple things. What worked for me was to enable ironing at 30%. That seemed to provide enough material to ensure that he letters stayed in place. Again, probably my filaments. Thanks!