This is a Lightbox with the logo from Vectrex (European Release).

The profile works OK with my settings but you must check and dial in your Printer accordingly.

there is a hole on the back side to hang the Lightbox and a hole on the side for a USB-C adaptor …
If you don't want to use the USB adaptor i have also included a small cap with a 4mm hole just to fit your cable in and another cap without a hole if you want to use a battery pack in it.

Enjoy !

USB-C Adaptor :https://s.click.aliexpress.com/e/_DBngla9
LEDs : https://s.click.aliexpress.com/e/_DnlApXf