Version 2 is out now!  Cleaner look! Find it here! https://makerworld.com/en/models/171997#profileId-188819

I haven't found a good solution to display my 2d art / Hueforge creations, so I came up with this! It normal Hueforge Dimensions up to 1.7mm thick and 200x200. Feel free to scale as you need, but would recommend not doing a uniform scaling as this will change the width of the channel in the mount.

2 Plates are included 1 with holes and one without incase you want to use some sort of command strip. These will need supports however the are easily removed. I recommend using normal supports as they keep the channel the dimensions. Tree supports are not as consistent for me.

Please drop a like if you do print and enjoy my designs this it does help support!

If you really are enjoying my designs and want to support my efforts to continue creating consider buying me a coffee! As these things use a lot of filament to print and prototype HAHA! https://www.buymeacoffee.com/markyd17g