Phone Stand LIGHT Version

Here is another small project.

Very quick and easy to make. You don't need many "ingredients".

Materials I used:

- Translucent PETG Orange from Bambu Lab - colour code 32300

- PLA Basic Black from Bambu Lab - colour code 10101

- 2-core cable approx. 10cm

- White 6000K LED strip from Amazon

https://www.amazon.de/dp/B08S3QLW5M?psc=1&ref=ppx_yo2ov_dt_b_product_details

- Micro USB 3.1 type C plug from Amazon

https://www.amazon.de/dp/B0BGK46LVY?psc=1&ref=ppx_yo2ov_dt_b_product_details

Other accessories:

- Soldering iron

- solder

- Tweezers

- Double-sided adhesive tape

- Cutter knife

- scissors

First you print out the parts. Then you cut off a piece of the LED strip approx. 6cm and then a piece of cable approx. 10cm.

Now solder the cable to the USB C plug.

Then you should push the cable with the USB C plug through the guide and place it on the outside. See pictures

Shorten the cable to 1.5 cm as shown in the picture.

Now solder the LED strip to the cable (pay attention to the plus and minus pole)

Insert the LED strip with the cable into the guide and close the opening.

Connect to the power supply and you're done.

Have fun printing and building

This article/post/text/images or the print profile and the finished phone holder may not be used for commercial purposes.

I hope you understand that.

if you like my work/project consider supporting me with these options:

• leave a like
• leave a comment
• download the file
• or By me a Coffee

Easy to print easy to light up

TBG