No Print Profile yet. Add one to earn points.
I have included a photo of the bulb holder and bulb you will need. I used a b22 golf ball led bulb and my bulb holder thread diameter is 27mm. If you want to use your own bulb holder and bulb I have included the files you can adapt for your own light source.
I have included a pdf of the lamp assembly instructions.
Print settings for heart_lamp_top and heart_lamp_bottom
Wall Line Count - 4
Top/Bottom Layers - 6
Infill - 20%
Support Placement - Everywhere
Support Overhang Angle - 60
Support Density - 0.3%
Support Z Distance - 0.1
Print settings for heart_lamp_lid
Wall Line Count - 2
Top/Bottom Layers - 6
Infill - 20%
Print settings for heart_lamp_feet
Infill - 100%
Thank you for supporting my design. I really appreciate it.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.