This MagSafe compatible cold shoe mount seamlessly integrates the convenience of MagSafe's magnetic attachment with the utility of a standard cold shoe interface, commonly used in photography and videography. Crafted to ensure a strong, secure connection, this device allows you to effortlessly attach various accessories like microphones, lights, or remote controls directly to your MagSafe-enabled iPhone. Its compact and sleek design ensures portability and ease of use, making it an essential tool for content creators, vloggers, and anyone looking to expand the capabilities of their iPhones for professional or recreational purposes, opening up new possibilities in mobile photography and videography.

Instructions

First, you will need to buy the magnet ring.

Disclaimer: Those links are provided for reference. They are not affiliated. 

• Recommended type, very strong. ID 42mm, OD 58mm, Depth 4.2 mm
  • Temu - where I bought mine: https://share.temu.com/qkfqvj4qrtA 
  • AliExpress - looks like the same: https://www.aliexpress.us/item/3256806155904047.html
• Thinner type, acceptable magnetic force. ID 46mm, OD 54mm, Depth 1.2mm
  • AliExpress https://www.aliexpress.us/item/3256805700263056.html select the white version which is stronger than the silver version.
• Or anywhere else, but note that only certain sizes are supported, see below for details.

Second, measure the width of your iPhone including the buttons. With the case on if you'd like to mount it on your case. Note that not all cases are MagSafe compatible.

Third, pick the right model file from Raw Model Files

1. Choose the right folder based on the magnet ring specs
2. Choose the right file based on the iPhone width measured in the second step. Choose one size up. For example. if your measurement says 77.9mm, then chose the file includes pw_78.6.

Finally, print the model and attach the magnet ring. Make sure you get the right magnet direction.