Hello everyone, introducing the Urban Flare Lamp! 🌟

Inspired by the LOFREE CANDLY Atmosphere Lamp, this design offers a unique twist. 🏮

Check out the modern take on a classic lantern. 💡

Explore the fusion of traditional charm with contemporary flair! ✨

⚠️⚠️⚠️ Also, refer to the Bill of Materials (BOM) in the PDF file ⚠️⚠️⚠️

Assembling:

1.First step is to connect the protection circuit to the battery and be careful to not invert the polarity

2. The second step is to attach the Type C socket at the bottom. I recommend using an extension (I used this link) so that you can remove the battery more easily in case of replacement.

3.Third step is to prepare the switch, firstly cut the third pin from the left side of the potentiometer

4.Step four secure the led strip to the slot. I recommend using an LED strip compatible with the designated slot. In any case, I advise securing it with a drop of hot glue. Next, we attach the extension cables for the power supply: black for the ground, which we will connect directly to the battery regulation circuit. We will use the yellow colour to connect the red wire of the LED strip to the recently modified potentiometer. Solder another yellow wire to the other pin of the potentiometer, which we will then solder to the regulation circuit.

5.Solder the yellow wire connecting the potentiometer to the regulation circuit as shown in the figure. Secure the potentiometer with hot glue, and now it will function as a rotary switch.

6.Screw on the top cap, making sure the wires do not twist too much, and you're done!