If you haven't yet decided what you're going to offer for Valentine's Day, I have the solution:

A Diamond ring tailored to fit your budget.

A real diamond ring can be very expensive. If you don't have enough money, just 3D print one!
After all, what counts is the intention 🙂

Nature takes more than 1 billion years to produce a diamond but you can have yours in less than 15 minutes.

This ring with a 36 carat (i mean grams) diamond, will be printed on the best plastic and will last a lifetime or until it ends up in the recycling bin.

Your wife will be overjoyed with this "expensive gift", i just wanted to be there to see her happy face!
She won't wait to show her friends her precious new jewelry!

You can tell her that you designed this gift exclusively for her. I'm not going to be upset about it.

Use different colors or types of filament for the ring and for the diamond, and you can also use a translucent filament.

You can print one of the 4 sizes avaliable:

• 17mm
• 19mm
• 21mm
• 23mm

Show us your creativity by commenting with photos of your master piece!

Printing Instructions

• Ring and diamond:
  • You will get a better finish if you use a layer height of 0.12mm or 0.16mm;
  • Take into account that it is a small piece, good adhesion to the bed will be necessary;
  • To attach the diamond to the ring, just put just a drop of glue on the tip of the diamond and place it in a straight surface facing down and put the ring on top. Gravity will take care of the rest.
• Ring box:
  • There are 2 versions. One for printers equiped with AMS and another for printers without AMS;
  • You can use a layer of 0.2mm.

Please comment if you have any suggestions or questions.