Nauvoo Illinois Temple hueforge

No Ams needed. Just color swap at layers.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA+ IIID Max Pink Transmission Distance: 5
PETG JAYO Gray Transmission Distance: 2.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to BambuLab Green
At layer #8 (0.72mm) swap to Marine Blue
At layer #10 (0.88mm) swap to Pink
At layer #12 (1.04mm) swap to Gray
At layer #13 (1.12mm) swap to Yellow
At layer #15 (1.28mm) swap to White for the rest.
 

Check out the Salt Lake City Temple:

Salt Lake City Temple hueforge by dohara1985 - MakerWorld

Please "Like", review, follow and upload make.

I spend a lot of time designing and allow it all to be used for free (including commercially).

If you'd like to help me out, below are the possible ways. Thank you in advance!

https://www.buymeacoffee.com/dohara1985o