Star Girls - Shin-Hati - Rebel or Rogue - by SPARX

After watching Ashoka on Disney the best parts for me was the Shin-Hati character with actress Ivanna Sakhno, then while looking for references started reading the hype regarding her origins . . . no spoiler will let you read them yourselves . . needless to say I was convinced she should join my collection so here she is the Fan Art/Sculpt of Ivanna Sakhno as Shin-Hati.

I have tried to keep costumes and sizes true to the images with a few adjustments to allow the model to be split and printed . .
The cloak is printed on FDM or SLA and is thin ! but as you can see printable.
Removable arms and heads allow for a number of different looks, you can also mix these parts with the NSFW add-ons for even more combinations.
. . .
This Download is ONLY THE MAIN FULL COSTUMES AND BODY PARTS ALL PARTS ARE INCLUDED AS IN PICTURES TO CREATE A FULL MODEL.

As previous an NSFW adult add-ons version is available to purchase separately.

https://cults3d.com/en/3d-model/naughties/star-girls-shin-hati-adult-add-ons-by-sparx

The torso’s , arms and head parts are removable and interchangeable with magnets (see pics)

Based on Ivanna’s Measurements of 173cm Tall 32B–25–34 the Model is 1/6th scale therefore at 173cm tall would be 288mm standing.
So model with base 265mm height, 245mm width 150mm deep.

Shin-Hati parts
1 upper torso Pose
3 Left Hand
3 Right Hand
3 lower torso
1 right shin
1 left shin
3 Head and head pin
1 Cloak one piece
1 Cloak 4 pieces
1 back panel
1 front panel
1 sabre light

1 Base one piece
1 Base two piece

1 head stand
1 torso stand

29 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS

Resin Printing;

Hollow 2.70 Raft 101%
Head’s, Upper Torso’s Lower Torso’s

DO NOT Hollow
Arms, sabre light, back panel, front panel, cloak parts.

FDM
Arms, sabre light, cloak parts, skirt panels 80% fill 0.12 speed 40
Rest at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing.
Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining.
Ensure skirt panels fit torso before fixing.