UPDATE 4/18/24: Added Australian Silver Kangaroo design and print profile.

This is the single-color filament versions of these tubes. If you're looking for multi-color versions, you can find them here: https://makerworld.com/en/models/185447#profileId-204194

This is a windowed storage tube with a friction lid for the following 1 oz bullion coins enclosed in Air-Tite capsules (no foam insert):

• American Silver Eagle
• Canadian Silver Britannia
• Mexican Silver Libertad
• British Silver Britannia
• Chinese Silver Panda
• Australia Silver Kangaroo

A logo is printed on each lid (Star for American Silver Eagle's, Saint George's Cross for Britannia's, Maple Leaf for, well, Maple Leaf's, Panda for Panda's, Kangaroo for Kangaroo's, and an Aztec Eagle for Libertad's) so you can tell which is which, and there are two sizes for either 10 or 20 coins.

These tubes will fit most other Air-tite enclosed Bullion dollar sizes as well.

The lid will be tight at first, but will loosen up after opening and closing 3 or 4 times.

Dimensions:

• 50mm x 50mm x 60mm tall (small tube) or 119mm tall (large tube). Inner diameter of 46mm (comfortable for 44.45mm Air-tite capsule width)

Recommended you print with basic PLA or PLA+. Matt PLA adds too much friction to the caps.

If you have requests, would love to create them, so let me know!