Tank Phone Holder (Tread Fidget) by patrickbryant1996

patrickbryant1996

Tools>Gadgets

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.20mm layer, 2 walls, 15% infill

Designer

4.9 h

1 plate

4.4(5)

0.28mm layer, 2 walls, 15% infill

1.5 h

1 plate

5.0(1)

Boost

101

Released

Description

I saw the wonderful Benchy Dozer while fidgeting with my Tread Fidget then I dropped my phone… Then I thought of combining all of these items into one sweet desktop toy!

Tank should have the same capabilities as the Benchy Dozer plus acts as a phone stand. I will also upload just a tank design and link it below.

Phone slot is 0.5" so even the chonkiest of phones should fit, Running test prints now and will update with photos after!

Credit for Tread Fidget belongs to @MottN - Link below and I included them in my print so I can run all at once.

Tank Fidget: https://makerworld.com/en/models/167994#profileId-184421

Benchy Dozer: https://makerworld.com/en/models/85433#profileId-91329

Tread Fidget: https://makerworld.com/en/models/59737#profileId-61823

Comment & Rating (7)

@user_1113871977

Print Profile

0.20mm layer, 2 walls, 15% infill

Wheels dont spin, but cool Model

The designer has replied

@patrickbryant19

Hi there! I ran into the same issue also... I believe the original designer of the treads recommends printing at a finer layer height than my overall model is set for. I was able to get them to spin somewhat after breaking them free, but would recommend printing at a lower layer height. I will likely update my model to a .24 or lower layer height to combat this in the future. If you find this works for you, please let me know!

@patrickbryant19

Print Profile

0.28mm layer, 2 walls, 15% infill

awesome! looks great

(Edited)