Headphone Stand (Can also be used as a light box)
This is an easy-to-print headphone stand with a simple, beautiful and elegant design.
You can choose to install LED lighting to increase the atmosphere, or you can use it directly without installing LED.
I hope you like it.
Prepress suggestions on how to print :
Main :
Normal printing.
Cover :
1. It is recommended to increase the first-layer traffic volume to 1.02~1.05.
a. Bambu Studio Preferences Setting > Activate Developer Settings
b. Quality > Advanced > First Layer Flow Ratio:1.02~1.05.
2. Use textured PEI.
If you need LED lighting, assembly parts and tools:
1. White or RGB LED Strip light is required, I use 5V USB Cable controller and LED Strip light.
2. The LED light strip can be fixed with hot melt glue or double-sided tape.
3. The USB light hole is preset to 15x5mm. If it does not fit the LED light strip you purchased,
you can use a soldering iron to enlarge the hole.
Assembly method:
1. Install LED lighting.
2. Use glue or black acetate tape to fix the Cover.