A1 mini Z linear rail lube oil reservoir
Copyright Claim
A1 mini Z linear rail lube oil reservoir
Boost
34
57
8
Print Profile(1)
0.2mm layer, 30% infill
Designer
35 min
1 plate
Boost
34
57
8
1
63
37
Released
Description
Hey!
While lubricating the Z linear rail on the A1 Mini some time ago I discovered a serious problem. The oil eventually ended in the components parts due to its viscosity and also gravity.
While I know most of the lubricating oils are not electro conductive I really don't think having the motherboard soaked in lubricating oil is anything but a dangerous situation to be in.
Lubrication became frustrating for me so I started to design something that would fix my problem.
I remodeled the bottom part and attached a reservoir system to it and a little bit of sponge.
Notes:
- this is not endorsed by Bambu Lab, it's just my creation, in my opinion it does not imply any risks to your printer but if anything happens I am not responsible for the damages.
- I use a little bit of sponge to guide the oil to the funnel
- I use a syringe to take the extra lubricating oil from the reservoir
- filament used is Bambu Lab Matte Marine Blue (11600)
Comment & Rating (8)
All
Print Profile
0.2mm layer, 30% infill
this is a Brilliant idea! this should be the standard configuration for all factory printers. printed with black pla basic and came out great. fits like it's a factory part.
0
Reply
Print Profile
0.2mm layer, 30% infill
Printed nicely.
0
Reply
Good idea ;)
1
Reply
Print Profile
0.2mm layer, 30% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 30% infill
0
Reply
Print Profile
0.2mm layer, 30% infill
0
Reply
Print Profile
0.2mm layer, 30% infill
0
Reply
Print Profile
0.2mm layer, 30% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Public Domain
© 2024 MakerWorld