Mask looks amazing. I got quite a big head (helmet size M to L), but it fits neatly.

The hex pattern perfectly hides the print height lines and makes the model look absolutely incredible, especially compared to the flat versions, available. I mean, just look at the pictures!!

All tributes to @Budwin for the model from Printables.

Important: The upload keeps failing, so please check the raw files and download the skull part of this print. Slicing takes a while due to the large size (10 min +).

Print notice:

• Recommended to use the two .3mf files, I provided, one for the smaller parts and one for the rest.
• Back part and eyes could be put on one plate.
• Printed the big part of the mask with .2 layer height and supports strongly recommended to ensure quality.
• Other parts require supports as well, got a very nice finish with .16 layer height.
• Used Sunlu Meta PLA, but it should work with any.

Magnets:

You need <=72 magnets of 2x7mm, like these.

However, the holes for magnets are ~7.7 mm , so you either need to modify each hole to ensure pressfit, or use glue instead.