This is front cover for print head for A1 and A1mini, that I created to make printer a little different. Its made in engine design with moving pistons. Also made with three different text, so you can chose what you prefere. There is “Ride or Die”, “Hot Rod” and for fun “Hot End” :)
Frame is the same for all my designs so you print just one and change faceplates as you like.
Installation:
First assemble pistons with rods same way as you can see on photo:
Next insert assembled pistons into engine faceplate:
Next align both rods eyelets and from the back clip in crankshaft.
At last just press faceplate into frame at all four corners.
Than remove original faceplate and extruder visualizer from your printer and clip frame carefully with aligning crankshaft with extruder rod to print head instead of original faceplate and than press on crankshaft to hold tightly on extruder rod.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.