Model

Dragon eyes set

Remix of Patstrick model: https://www.thingiverse.com/thing:3192704, the dragon's eyes were adapted for use in the Articulated dragon with movable jaw of Tomasz Janota.

ATTENTION:

This eye set is only used for this version which has no eyes:

• No eyes -> dragon with movable jaw and no eyes

SCALE:
100%; you can resize if you need for other models

ASSEMBLING
I recommend painting and gluing the eyes first, then painting the dragon/attaching the jaw.

Print Settings

• Rafts/Brim: Doesn't Matter
• Supports: No
• Resolution: 0.08 mm layer height with 0.4 nozzle but you can use 0.2 for better resolution
• Infill: 15% gyroid infill density
• Filament color: White on Any if you plan to paint it
• Filament material: PLA
• Notes: I reduced the print speed to 50%

License

EYE SET for "Seven the Articulated Dragon"
by Patstrick is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.