Printed in PLA in two colors on an X1C. Impressive !
A few small flaws but nothing serious.
If you could do the same with the magazine eject button that would be great! Thanks
hello,
Anyone have an idea of what went wrong here? X1, overature filament on cool plate 16mm, 2 walls 10% using generic pla setting. door and lid closed
looks like the tool head was getting stuck or hitting causing layer shifts . you can try adding zhop or you can make sure your settings are good for the filament ( i also suggest gyro infill so you don't have to worry about hitting infill and dragging there which could be causing this ( not 100% what is causing it but it would be my guess.)