A simple shelf for printer accessories with the BAMBU LAB logo

I used a lot of nice supports for the shelf, thanks to the author.

Print the supports here:

https://makerworld.com/en/models/172465#profileId-189382

My model is just the shelf top.

1, the frame model has the BAMBU LAB logo on the bottom - to see the logo it must be printed with AMS (if you download the stl - you have to fill in the logo manually).
if you print without AMS, or with one color, the logo will not be visible. A large Bambu Lab logo is embossed on the top side of the board - it is printed in one color

2, frameless model - there is a large Bambu Lab logo embossed on the top of the board - it is printed in one color - it does not need to be AMS

When printing, the maximum size of the bed is used, printing is in portrait - I recommend slowing down to 50%