For this build, you will only need 6mm wide foam tape. Different foam thickness files are available. I recommend to use at least a 2mm foam. With less than that, it will be hard to have enough compression for a good seal.

PLA should be good enough for this print. In normal conditions, the bottom of the chamber never reaches a temperature above 60°C.

This model should be compatible with the K1C

Creality K1 Max Version by Guilouz

Recommended Print Settings :

No supports
Nozzle : 0.4
Layer height : 0.2
Perimeters : 3
Top/Bottom layers : 4
Infill : 20%

Want to support my work ?

Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest updates.
If you wish to further help me to fuel future projects, consider buying me a coffee, I'm literally running on those! Every cup counts and is immensely valued.